This is great since your risk of stalling midway through a dangerous or very technical obstacle is significantly reduced. 4×4 low is designed to keep the engine in a high revving state to ensure you have all the engine’s power and torque available at all times. This drastically increases your vehicle’s res or revolutions per second but also drastically reduces the vehicle’s ability to drive fast. When you select 4×4 low, the low ratio transfer case is engaged which uses low ration gears.
#LAYCOCK OVERDRIVE CHEVY 4X4 DRIVER#
You as the driver and owner of your 4×4 know the width and ground clearance andīreak-over angles better than any other driver, so your driving line might not necessarilyīe the exact same as the next guy or even the 4×4 that went through that Your time to walk the obstacle and choose the best driving line for your 4×4. Thumb or gauge is, if you can walk it, you can drive it in 4×4 low. The 4×4 and walk the obstacle before you attempt driving it. Scan and survey the driving conditions ahead. When you driving off-road you need to constantly As mentioned before, it’s not the speed that’s important in any of the above driving surfaces but rather achieving and maintaining traction combined with maximum power availability.Īlways remember to stop or slow down to 5mph before engaging 4-Lo and depress your clutch when shifting from High-range to low-range. How fast you can drive is not always important under these conditions, except maybe in deep sand dunes where momentum is required. The above-mentioned surfaces are all low traction environments that required absolute vehicle control. Important for the safeguarding of your 4×4 as well as the safety of you and anyĤ×4 low should be selected when driving on What happens when we Drive fast in 4×4 Low.The next part of this article discusses when to engage 4×4 low, how fast we should drive in 4×4 hi, and what happens to the driving dynamics of the 4×4 when we engage low range. With that being said, we also need to understand when it is applicable to engage 4×4 low and when we should drive in 4×4 high or 4H. 10mph is the maximum recommended speed to drive in low range on technical off-road tracks. We will also look at when we should drive in 4×4 low and how it behaves in various off-road conditions.ĭriving speed in 4×4 low should never exceed 10mph since the surface conditions are usually low traction, rocky, steep, and uneven surfaces that require low-speed control. This article will discuss how driving in 4×4 low reduces gear ratios and how that affects your speed. Asking how fast you can drive in 4×4 low might seem like a weird question to some, however, it’s quite relevant since off-road environments pose a variety of scenarios that requires different approaches.
0 kommentar(er)
